• Ground-breaking Microbe Technology remediates hydrocarbons into water and carbon dioxide.

• Eliminates 100% of disposal costs.

• Eliminates granular absorbents, socks, pads and caustic degreasers.

• Excellent rinsability, dries quickly and removes oily, slick film leaving a non-slip surface.

• NSF approved A-1, A-4 class; Biodegradable with a PH of 7.

• Safe to use on and water-safe surface including metal, concrete, plastic & rubber.

• Renders flammable liquids such as gasoline, diesel and jet fuel, non-flammable in minutes.

• Non-toxic, non-pathogenic and completely harmless to human, plant, animal & marine life.



BioRem 2000 Fuel Eliminator™ significantly reduces the ability of flammable hydrocarbons to ignite.
First, the VOC’s are rendered inert on contact eliminating the potential of ignition and knocking down noxious odors.
Second, it removes the fuel and slickness resulting in reduction of future accidents and surface degradation.

True Life Example Below:

.......

Example of BioRem2000 Fuel Eliminator™ at work (above) – A 1,000 gallon underground fuel storage tank containing contaminated jet fuel with standing spills, residue and flammable vapors. Before this tank could be dismantled with cutting torches, the remaining fuel needed to be neutralized and the tank thoroughly cleaned to remove flammable vapors. Using spray equipment, two gallons of BioRem-2000 Fuel Eliminator™ were applied and circulated throughout the tank. The remaining jet fuel was remediated, rendering the fuel non-flammable and neutralizing any flammable vapors. The tank was rinsed with pressurized water leaving a clean, residue-free and vapor free environment. Work was completed safely, thoroughly & economically.

HYDROCARBON DEGRADE CHART

Directions for Use

The Process begins immediately upon contact with hydrocarbons and continues until all hydrocarbons are consumed. Pre-mixing with water does not activate the product. BioRem2000 Fuel Eliminator™ may be used at a 1:1 dilution rate (from concentrate) with water during warm weather, and undiluted (full concentrate) during cold weather.

1. With a pressurized sprayer, cover the spill with BioRem2000 Fuel Eliminator™ completely
saturating the surface of the spill. Agitate to mix if there is depth to the spill.

2. Re-apply 3 to 4 minutes after initial application.

3. Rinse surface with clean water.

Product Packaging Available:

Product #....Product.........................................Size...........Weight
BG6004..........BioRem2000 Fuel Eliminator™..........4 – 1 Gal.
BG6005..........BioRem2000 Fuel Eliminator™..........5 Gal.................45 lbs.
BG6015..........BioRem2000 Fuel Eliminator™..........15 Gal.............135 lbs.
BG6055..........BioRem2000 Fuel Eliminator™..........55 Gal.............540 lbs.
BG6275..........BioRem2000 Fuel Eliminator™..........275 Gal.......2,551 lbs.